 |
 |
 |
 |
|
 |
|
Features
This aftermarket scale is made from 5/8" wide strip spring
steel, same as the original. The overall length is 78-1/16" long,
and the length between the centers of the end grommets are 77-7/16"
long. The holes in the brass end grommets for the spring are 1/4" in
diameter. The mounting slot measures 1/4" wide x 3/4" long. Has an inch and a metric side.
Also included with each tape measure assembly is a new replacement tension spring (equivalent to Challenge part #4052).
Made in USA.
Note:
This back
gauge tape assembly fits all of the model 230 (23.0") Challenge paper
cutters. Older models (green/yellow) use increments of eighths and twelfths
of an inch on their tapes and are labeled as such (Challenge part #
A-4448). This tape will replace those and work the same but the labeling
on the magnifying glass would be the only change.
For other back gauge tape measures:
- For a back gauge tape measure for Challenge 193 cutters, see our part number G36029.
- For a back gauge tape measure for Challenge 265 cutters, see our part number G36035.
- For a back gauge tape measure for Challenge 305 cutters, see our part number G36717.
- For a back gauge tape measure for Challenge 370 cutters, see our part number G36033.
- For a back gauge tape measure for Challenge 265 & 305 F Series cutters, see our part number G27086.
- For a back gauge tape measure for Challenge 305 HA & HB cutters, see our part number G27081.
- For a back gauge tape measure for Challenge 305 HAE & HBE cutters, see our part number G36746.
- For a back gauge tape measure for Challenge 305 H cutters, see our part number G36027.
Different
back gauge tape measure lengths, for other models of Challenge Champion
paper cutters, can be made to order. Call or email for information.
|
|
|
|
|
|
|