 |
 |
 |
|
Slot covering belt or tape for Polar 115 S, Polar 115 SD, Polar 115 SDP, Polar 115 EM, Polar 115 EMC II, and Polar 115 EMC-MON paper cutters, after machine serial number 5531400, and up to machine serial number 6432006. This green table slot covering belt is equivalent to, and a direct replacement for, the original Polar part number 242627. It is an aftermarket belt which is the same size as, and made from the same material as the original. It contains the center "V" guide which is fused to the bottom side of the belt.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Slot covering belt or tape for Polar 115 S, Polar 115 SD, Polar 115 SDP, Polar 115 EM, Polar 115 EMC II, and Polar 115 EMC-MON paper cutters, after machine serial number 5531400, and up to machine serial number 6432006. This green table slot covering belt is equivalent to, and a direct replacement for, the original Polar part number 242627. It is an aftermarket belt which is the same size as, and made from the same material as the original. It contains the center "V" guide which is fused to the bottom side of the belt.
It measures 60 mm wide (2 3/8" wide) by 1.25mm thick (.050" thick). The cogged center "V" guide is 10 mm wide. As shown in the photo, both ends have the mounting slots and holes cut out.
For the same size belt, without the bottom "V" guide, (for use on earlier Polar 115 EMC models, and Polar 115 CE models), see our Polar slot covering tape part number G53765.
|
|
|
|
|
|
|