Steel Clamping Bar grips the end of the green slot covering belt to attach the belt to the cable. The original clamping plate was made of plastic and tends to crack with age.

Steel Clamping Bar to "sandwich" the end of the green slot covering belt, to attach the belt to the tensioning cable. The original clamping plate was made of plastic and tends to crack with age.

Slot covering tape or belt for the table on Polar 76 EM paper cutters. This green back gauge belt is equivalent to, and a direct replacement for, the original Polar part numbers 017380 and 018317 (ZA3.017380 and ZA3.018317). It is an aftermarket belt which is made from the same material as the original.

Slot covering tape or belt for Polar 78 guillotine paper cutters, such as the Polar 78 X, Polar 78 XS, Polar 78 XT, Polar 78 E, Polar 78 S, Polar 78 ES, and Polar 78 ED models. This green backgauge belt is equivalent to, and a direct replacement for, the original Polar part number 033637 or ZA3.033637. It is an aftermarket belt which is made from the same material as the original slot cover tape or belt.

G33799- Green Table Slot Belting For Polar And Itoh for stock already cut to 2.2 meters (7.21785 feet).

Convey Belt (3600x40)/Green Table Slot Belting for Polars and Itoh Cutters

Slot covering tape or belt for some of the Polar 92 EM, some of the Polar 92 EMC 1 and some of the Polar 92 EMC 2 guillotine paper cutters (fits from machine serial number 5101601, up through machine serial number 5511250). Call for cutters with other serial numbers.

Slot covering tape or belt for some of the Polar 115 CS, Polar 115 CE, and Polar 115 EMC I guillotine paper cutters. This ONLY fits between machine serial numbers 4831001 to 4831804, and for Polar 115 EMC cutters between machine serial numbers 4836001 to 4836040. These cutters were built only in approximately 1978.

Slot covering tape or belt for Polar 90 CE paper cutters. This back gauge belt is only for Model 90 CE cutters between machine serial numbers 4211001 and 4611715. This green belt is equivalent to, and a direct replacement for, the original Polar part number 206458. It is an aftermarket belt which is made from the same material as the original.

Slot covering tape or belt for Polar 92 CE and 92 CS paper cutters. This back gauge belt is only for Model 92 CE and CS cutters between machine serial numbers 4711001 and 5011700. This green belt is equivalent to, and a direct replacement for, the original Polar part number 221183. It is an aftermarket belt which is made from the same material as the original.

Slot covering tape or belt for the Polar 115 CS and Polar 115 CE guillotine paper cutters. This ONLY fits Polar paper cutters between machine serial number 4503001 to 4731747. These cutters were built in the mid to late 1970's.

Slot covering tape or belt for the Polar 115 CS and Polar 115 CE guillotine paper cutters. This ONLY fits between machine serial number 4732001 to 4732730. These cutters were built only in 1977.

Slot covering tape or belt for Polar 115 CS and Polar 115 CE guillotine paper cutters (from machine serial number 4931001, through machine serial number 5131193) and for Polar 115 EMC (115 EMC I) paper cutters, from machine serial number 4936001 through 5136438. Also fits Polar 115 EMC II and 115 EMC MON models from machine serial number 5163601 through 5531350.

Slot covering belt or tape for Polar 92 S, Polar 92 SD, Polar 92 SDP, Polar 92 EM, 92 EMC-MON, and Polar 92 EMC II paper cutters, after machine serial number 5511301 and up to serial number 6511120.

Slot covering tape or belt for Polar 115 CE paper cutters. This back gauge belt is only for Model 115 CE cutters between machine serial numbers 4232001 and 4431931. This green belt is equivalent to, and a direct replacement for, the original Polar part number 208513. It is an aftermarket belt which is made from the same material as the original.

Slot covering belt or tape for some of the Polar 137 EMC paper cutters. This green table slot covering belt is equivalent to, and a direct replacement for, the original Polar part number 231216 and ZA3.231216. It is made from the same material as the original.

Slot covering tape or belt for Polar 150 CE paper cutters. This back gauge belt is only for Model 150 CE cutters between machine serial numbers 4321001 and 4421203. This green belt is equivalent to, and a direct replacement for, the original Polar part number 215263. It is an aftermarket belt which is made from the same material as the original.

Slot covering belt or tape for many of the Polar 155 paper cutters. This green table slot covering belt is equivalent to, and a direct replacement for, the original Polar part number 223598. It is made from the same material as the original.

Slot covering belt or tape for Polar 115 S, Polar 115 SD, Polar 115 SDP, Polar 115 EM, Polar 115 EMC II, and Polar 115 EMC-MON paper cutters, after machine serial number 5531400, and up to machine serial number 6432006. This green table slot covering belt is equivalent to, and a direct replacement for, the original Polar part number 242627. It is an aftermarket belt which is the same size as, and made from the same material as the original. It contains the center "V" guide which is fused to the bottom side of the belt.

Slot covering belt or tape for Polar 137 S, Polar 137 SD, Polar 137 SDP, Polar 137 EM, Polar 137 EMC II, and Polar 137 EMC-MON paper cutters, after machine serial number 5541001 up to serial number 6441239. This green table slot covering belt is equivalent to, and a direct replacement for, the original Polar part number 242588 or Polar ZA3.242588. It is an aftermarket belt which is the same size as, and made from the same material as the original. It contains the center "V" guide which is fused to the belt.

Slot covering belt or tape for Polar 155 EM, Polar 155 EMC II (155 EMC 2), Polar 155 EMC-MON, Polar 155 S, Polar 155 SD, and Polar 155 SDP guillotine paper cutters, after machine serial number 5521001, and up to serial number 6421056. This green table slot covering belt is equivalent to, and a direct replacement for, the original Polar part number 242590. It is an aftermarket belt which is the same size as, and made from the same material as the original. It contains the center "V" guide which is fused to the belt.

Slot covering belt or tape for some of the models of the Polar 155 EMC, 155 EM, 155 SD, and 155 SDP paper cutters. This belt fits cutters built between machine serial number 5521001 and 6421056. (Always check your parts book, or the length of your existing belt, before ordering. There are many length variations with these belts. The original part number is usually located on page 20.22 of the Polar parts books.)

Slot covering belt or table slot cover tape for the later models of the Polar 92 S, Polar 92 E, and Polar 92 ED paper cutters. This belt fits cutters built after machine serial number 6401101.

Slot covering belt or slot covering tape for the Polar 137 E, 137 S, 137 ES, and Polar 137 ED models, after serial number 6404101.

Slot covering belt or tape for Polar 155 S, 155 E, and 155 ED paper cutters built after serial number 6502101. This does not fit cutters built before machine serial number 6502101. (Always check your parts book for the original belt part number before ordering. There are many length variations with these belts. The original part number is usually located on page 20.22 of the Polar parts books.)

Slot covering belt or tape for many of the Polar 115 S, 115 E, 115 ES, 115 ED, 115 X, and 115 XT paper cutters. This back gauge belt does not fit cutters with a serial number before 6403101. (Always check your parts book for the original part number before ordering. There are many length variations with these belts. The original part number is usually located on page 20.22 of the Polar parts book.)